Annual Service of Your Oil-Fired Appliance Chimney
For safe and efficient operation, your chimneys should receive at least a level one inspection annually by a CSIA Certified Chimney Sweep®, and maintained as needed. Each year improperly maintained chimneys cause significant numbers of injuries and deaths, and accounts for millions of dollars in property losses. Make chimney inspections a regular part of your home maintenance schedule.
During the winter, oil-fired appliances are subject to long running cycles. These long run times produce oil soot that may adhere to the sides of the chimney and eventually fall to the base of a masonry chimney or directly into the top of the oil-fired appliance. This fallen soot build-up may restrict the flow of flue gases which consist mostly of nitrogen, carbon dioxide and water vapor.
The combustion process also produces carbon monoxide (a tasteless, odorless, poisonous gas). Carbon monoxide may spill back into the house instead of going up the chimney if appliances are not adequately vented or when the chimney base is not properly swept.
A common misconception is that your oil service technician takes care of the chimney. The reality is that the oil burner company may shovel out the base of a brick chimney and they may brush out the connector pipes, but likely will not clean the chimney system.
Additionally, some oil burner technicians may tell the homeowner that the system is okay without even inspecting the entire chimney. This includes going to the roof and inspecting the interior as well as the exterior masonry (if applicable), flashing, chimney cap, etc.
The National Fire Protection Association 211 states that chimneys shall be “inspected annually and cleaned and repaired if needed”. Just as the oil furnace is serviced annually, so should your chimney system be serviced annually by a CSIA Certified Chimney Sweep®.
Many homeowners are not aware that the chimney’s interior, when not properly maintained, will decay and break down. Failing to have an annual chimney inspection allows such deterioration to remain undetected. What would happen if you didn’t change the motor oil in your car for 50,000 miles? Regular maintenance always pays off in the long run. The same applies with your chimney.
Soot, a byproduct of combustion, is comprised of carbon and sulphur. This sulphur, when mixed with rain water or moisture from the flue gases is absorbed into the flue tile and starts a deteriorating process called flaking or spalling. Just like regular visits to the dentist to remove tartar on your teeth, annual chimney service will remove these soot deposits and keep deterioration to a minimum.
In metal chimneys, the chimney lining is constructed of stainless steel, which will not rust, but can corrode from the oil soot’s sulfuric acid reaction. This corrosion causes small pinholes to form which ruin the integrity of the liner. When these pinholes form, the liner is unable to properly contain the byproducts of combustion. When a clay lining in a masonry chimney flakes, or a metal chimney or lining system corrodes, they are unable to contain the heat and the flue gases, thus creating a potential hazard.
When your CSIA Certified Chimney Sweep arrives at your home to perform the annual inspection and sweeping of the oil-fired appliance chimney, you can typically expect:
When your chimney professional has completed the evaluation, he or she will recommend any corrective actions that might be required.
An annual inspection and sweeping by a CSIA Certified Chimney Sweep is your first line of defense to detect and correct potential problems.
A Word of Advice
Your chimney is an important part of your home heating system. For safe and efficient operation, your chimney should be inspected annually by a CSIA Certified Chimney Sweep and serviced as needed. Each year, unmaintained chimneys cause significant numbers of deaths and injuries and account for more than $200 million in property losses. Make chimney inspections a regular part of your home maintenance schedule.
During the winter, oil-fired appliances are subject to long running cycles. These long run times produce oil soot that may adhere to the sides of the chimney and eventually fall to the base of a masonry chimney or directly into the top of the oil-fired appliance. This fallen soot build-up may restrict the flow of flue gases which consist mostly of nitrogen, carbon dioxide and water vapor.
The combustion process also produces carbon monoxide (a tasteless, odorless, poisonous gas). Carbon monoxide may spill back into the house instead of going up the chimney if appliances are not adequately vented or when the chimney base is not properly swept.
A common misconception is that your oil service technician takes care of the chimney. The reality is that the oil burner company may shovel out the base of a brick chimney and they may brush out the connector pipes, but likely will not clean the chimney system.
Additionally, some oil burner technicians may tell the homeowner that the system is okay without even inspecting the entire chimney. This includes going to the roof and inspecting the interior as well as the exterior masonry (if applicable), flashing, chimney cap, etc.
The National Fire Protection Association 211 states that chimneys shall be “inspected annually and cleaned and repaired if needed”. Just as the oil furnace is serviced annually, so should your chimney system be serviced annually by a CSIA Certified Chimney Sweep®.
Many homeowners are not aware that the chimney’s interior, when not properly maintained, will decay and break down. Failing to have an annual chimney inspection allows such deterioration to remain undetected. What would happen if you didn’t change the motor oil in your car for 50,000 miles? Regular maintenance always pays off in the long run. The same applies with your chimney.
Soot, a byproduct of combustion, is comprised of carbon and sulphur. This sulphur, when mixed with rain water or moisture from the flue gases is absorbed into the flue tile and starts a deteriorating process called flaking or spalling. Just like regular visits to the dentist to remove tartar on your teeth, annual chimney service will remove these soot deposits and keep deterioration to a minimum.
In metal chimneys, the chimney lining is constructed of stainless steel, which will not rust, but can corrode from the oil soot’s sulfuric acid reaction. This corrosion causes small pinholes to form which ruin the integrity of the liner. When these pinholes form, the liner is unable to properly contain the byproducts of combustion. When a clay lining in a masonry chimney flakes, or a metal chimney or lining system corrodes, they are unable to contain the heat and the flue gases, thus creating a potential hazard.
When your CSIA Certified Chimney Sweep arrives at your home to perform the annual inspection and sweeping of the oil-fired appliance chimney, you can typically expect:
- Equipment will be set up.
- Areas which may otherwise allow soot to enter your home will be sealed.
- The pipe connecting the oil appliance to the chimney will be disconnected, swept and reconnected.
- The exterior of the chimney will be inspected.
- The chimney/flue will be swept if needed.
- The interior of the chimney will be inspected to determine its soundness.
- Loosened soot deposits will be removed.
- When service has been completed, the appliance will be restarted for you.
When your chimney professional has completed the evaluation, he or she will recommend any corrective actions that might be required.
An annual inspection and sweeping by a CSIA Certified Chimney Sweep is your first line of defense to detect and correct potential problems.
A Word of Advice
Your chimney is an important part of your home heating system. For safe and efficient operation, your chimney should be inspected annually by a CSIA Certified Chimney Sweep and serviced as needed. Each year, unmaintained chimneys cause significant numbers of deaths and injuries and account for more than $200 million in property losses. Make chimney inspections a regular part of your home maintenance schedule.